金沙澳门娱乐平台下载-金沙官网3554cc-js 5678.com
主营:玻璃钢管,玻璃钢电力管,玻璃钢夹砂管,玻璃钢电缆珍爱管,玻璃钢环绕纠缠管等
js 5678.com
河北散石环保设备有限公司
手机:18631848868
联系人:姚司理
地点:河北省衡水市枣强县
专营:玻璃钢管,电力管,夹砂管
新闻动态 >> 玻璃钢管特性
玻璃钢管特性
[泉源:http://www.gangguancom.com] [作者:aowl]-金沙澳门娱乐平台下载 [日期:19-03-01] [阅读次数:]

玻璃钢管特性
Characteristics of FRP Pipe
1.耐侵蚀机能好。因为玻璃钢的重要原材料选用高分子身分的不饱和散脂树脂和玻璃纤维构成,能有用反抗酸、碱、盐等介质的侵蚀和未经处置惩罚的生涯污水、腐蚀性泥土、化工废水和浩瀚化学液体的腐蚀,在一般情况下,可以或许临时连结管道的平安运转。
1. Good corrosion resistance. As the main material of FRP is composed of unsaturated polyester resin and fiberglass, it can effectively resist the corrosion of acid, alkali, salt and other media, and the erosion of untreated domestic sewage, corrosive soil, chemical wastewater and many chemical liquids. In general, it can maintain the safe operation of pipelines for a long time.
2.抗老化机能和耐热机能好。玻璃钢管可正在-40℃~70℃温度范围内临时运用,接纳特别配方的耐高温树脂借可正在200℃以上温度一般事情。临时用于露天运用的管道,其表面里增加有紫外线吸收剂,去消弭紫外线对管道的辐射,延缓玻璃钢管道的老化。
2. Good ageing resistance and heat resistance. FRP pipe can be used for a long time in the temperature range of - 40 ~70 ~C, and the high temperature resistant resin with special formulation can work normally at temperatures above 200 ~C. For long-term use in open air pipelines, ultraviolet absorbent is added to the outer surface to eliminate the radiation of ultraviolet radiation to pipelines and delay the aging of FRP pipelines.
3.抗冻机能好。正在零下20℃以下,管内结冰后不会发作冻裂。
3. Good frost resistance. The freezing crack will not occur when the tube freezes below 20 C.
4.重量沉、强度下、运输轻易。玻璃钢管不只重量沉、强度下、可塑性强、运输取安装轻易,借轻易安装种种分支管,且安装手艺简朴。
4. Light weight, high strength and convenient transportation. FRP pipe is not only light in weight, high in strength, strong in plasticity, convenient in transportation and installation, but also easy to install various branch pipes, and the installation technology is simple.
5.水力前提好。内壁润滑、运送能力强,不结垢、不生锈、水阻小。
5. Good hydraulic conditions. Smooth inner wall, strong conveying capacity, no scaling, no rust, low water resistance.
6.可设想性好。玻璃钢管可凭据用户的种种特定要求,诸如差别的流量,差别的压力,差别的埋深和载荷状况,设想制造成差别压力品级和刚度品级的管道。
6. Good design. FRP pipes can be designed and manufactured according to users'specific requirements, such as different flow rates, different pressures, different burial depths and loads.