影响中空玻璃设备质量的身分重要有原材料的选用和消费制造工艺。个中原材料的量将间接影响中空玻璃的质量和寿命。目前国内中空玻璃有三种：槽铝式单道密封、槽铝式双道密封、复合密封胶条式中空玻璃。槽铝式单道密封果密封差，易进气，致使玻璃结露、结霜，寿命短，已镌汰。正在玻璃质料给定后，好比一般玻璃或钢化玻璃，那么凭据玻璃强度设想实际，玻璃本片的断裂强度便肯定下来了。因为中空玻璃机械消费的玻璃是由两片（或两片以上）玻璃组成，周边密封构成一个密封的空气层，中空玻璃正在一面玻璃遭到载荷做用时，受力面玻璃变形紧缩中空层气体，气体压强增大，将局部载荷传送给另一面玻璃，因而正在气体密封状况下，中空玻璃是两片玻璃配合负担载荷，两片玻璃同时变形。中空玻璃是两层或多层平板玻璃由灌注了干燥剂的铝框用丁基胶和散硫胶粘结而成。 The main factors affecting the quality of hollow glass equipment are the selection of raw materials and the manufacturing process. The quality and life of the hollow glass will be directly affected by the quality of raw materials. At present, there are three kinds of hollow glass in China: groove aluminum single channel seal, channel aluminum double channel seal, compound seal rubber strip type hollow glass. The channel aluminium single seal is sealed by seal and easy to carry, which causes the glass to be exposed, frosting and short life. After the glass material is given, such as common glass or toughened glass, then according to the design theory of glass strength, the rupture intensity of glass original film is determined. Because of insulating glass machine production of glass is made up of two or more than two pieces of glass, peripheral seal form a seal air layer, hollow glass, in one side glass loading bearing surface deformation compression hollow glass layer gas, gas pressure increase, will be part of the load transfer to the other side glass, therefore in the condition of gas seal, hollow glass is two pieces of glass to share load, two pieces of glass and deformation. Hollow glass is a two-story or multi-layer plate glass which is made of the aluminum frame of the dryer with butyl and polysulfide.